Ceramic Tile Floor Finish - Porcelain tile flooring or ceramic is extremely durable and an excellent investment at home. Tiles never wear out, and practically will continue forever if they are looked after.
You'll need to remove all the molding and baseboards. Eliminate any existing floor coverings, carpeting, or wooden floors. Clean the subfloor making sure it's free of dust and debris. Make sure that the flooring is secure and sturdy. Install cement backer board onto the stabilized flooring and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring should be disposed of, and such things are not picked up by most trash services.
Use a chalk line to mark two lines that intersect in the middle of the region. Make sure the lines are square to each other (90 degrees). Look at just how the tiles are ordered; you need as many whole tiles in the middle as you possibly can. Before you are satisfied with the way they've been placed, fiddle with the tile.
Use thin set to hold your tiles set up. Utilize a notched trowel to spread the thin set. Distribute the thin-place simply to as far as you can reach and lay a tile. Install your tiles to the inset using a firm downward pressure. Remember to put spacers involving the tiles. It's possible for you to harness on the tile gently to make sure that it is in place. Begin at the centre and work out to the walls. Border tiles and the cut tiles are installed last.