Dull Spots On Tile Floor - Porcelain tile flooring or ceramic is extremely durable and an excellent investment in your house. Tiles will continue forever when they can be looked after, and almost never wear out. When you are getting ready to install the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all the molding and baseboards. Eliminate, carpeting, or wooden floorings. Clean the subfloor making sure it is free of dust and debris. Make sure the flooring is sturdy and secure. Install cement backer board onto the stabilized flooring and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring should be disposed of, and items that are such are not picked up by most rubbish services.
Utilize a chalk line to mark two lines that intersect in the middle of the place. Be sure that the lines are square to every other (90 degrees). Put spacers between the tiles, leaving enough room for the grout. Look at just how the tiles are arranged; you need as many entire tiles in the middle as you possibly can. Until you're happy with the way they are placed fiddle with the tile.
Use set to hold your tiles in position. Utilize a notched trowel. Disperse the thin-set merely to as far as you can reach and lay a tile. Install your tiles to the inset using a strong downward pressure. Remember to place spacers involving the tiles. You're able to harness the tile gradually to ensure that it's in place. Border tiles and the cut tiles are installed.