Wood Flooring On Top Of Tiles - Ceramic or porcelain tile flooring is extremely durable and an excellent investment in your house. Tiles never wear out, and practically will continue forever if they can be taken good care of. When you are preparing to set up the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Eliminate any existing floor coverings, carpet, or wooden floorings. Clean the subfloor making sure it's free of dust and debris. Make sure that the flooring is stable and tough. The old flooring will need to be disposed of, and most rubbish services don't pick up items that are such.
Utilize a chalk line to mark two lines that intersect at the center of the region. Make certain the lines are square to each other (90 degrees). Put spacers between the tiles, leaving enough room for the grout. Look at how the tiles are ordered; you want as many whole tiles in the centre as you can. Fiddle with all the tile before you're pleased with the way they are positioned.
Use thin set to hold your tiles in position. Make use of a notched trowel. Disperse the thin-place only to as far as you are able to reach and lay a tile. Install your tiles to the inset with a firm downward pressure. Remember to put spacers involving the tiles. You're able to harness the tile on the corners gradually to make sure that it is in place. Begin at the centre and work out to the walls. The cut tiles and border tiles are installed.