Wood Flooring Over Asbestos Tile - Ceramic or porcelain tile flooring is extremely durable and also a great investment in your home. Tiles will last forever if they are cared for, and almost never wear out. When you are getting ready to put in the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a lot of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Remove, carpet, or wooden floors. Clean the subfloor making sure it's free of dust and debris. Make sure that the flooring is secure and sturdy. Install cement backer board onto the flooring that was stabilized and the backer board in with 2 inches, at every floor joist screw galvanized screws. The old flooring will need to be disposed of, and such items are not picked up by most rubbish services.
Utilize a chalk line to mark two lines that intersect in the centre of the region. Make certain that the lines are square to each other (90 degrees). Put a row of tiles along both lines on the floor that was dry. Set spacers between the tiles, leaving enough room. Look at the way the tiles are arranged; you need as many entire tiles in the centre as you can. Before you are pleased with the way they've been positioned fiddle with all the tile.
Use set to hold your tiles set up. Utilize a notched trowel to spread the thin set. Distribute the thin-place only to as far as it is possible to reach and lay a tile. Install your tiles to the inset having a firm downward pressure. Don't forget to put spacers involving the tiles. You're able to exploit on the tile gradually to be sure that it's in place. Start in the centre and work out to the walls. The cut tiles and border tiles are installed.