Red Spanish Tile Floors - Porcelain tile flooring or ceramic is very durable and also a great investment in your home. Tiles will continue forever if they have been taken care of, and almost never wear out. If you are getting ready to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a lot of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You will need to remove all the molding and baseboards. Remove wooden floorings, carpeting, or any existing floor coverings. Clean the subfloor making sure it's free of debris and dust. Make sure that the flooring is tough and secure. Install cement backer board onto the flooring that was stabilized and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and most rubbish services do not pick up such things.
Utilize a chalk line to indicate two lines that intersect at the center of the region. Ensure that the lines are square to each other (90 degrees). Place a row of tiles along both lines on the floor that was dry. Set spacers between the tiles, leaving enough room for the grout. Look at the way the tiles are ordered; you need as many whole tiles in the center as you possibly can. Fiddle with the tile before you're content with the way they may be placed.
Use set to hold your tiles set up. Utilize a notched trowel. Distribute the thin-place just to as far as you can comfortably reach and put a tile. Install your tiles into the inset having a firm downward pressure. Don't forget to put spacers involving the tiles. You're able to exploit on the tile gently to be sure that it is in place. Begin in the center and work out to the walls. The cut tiles and border tiles are installed.
Tags: #red spanish tile floors