Groutless Stone Floor Tile - Porcelain tile flooring or ceramic is very durable and also a great investment in your home. Tiles never wear out, and practically will last forever if they are taken good care of. If you are preparing to put in the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You will need to remove all of the molding and baseboards. Eliminate wooden floors, carpeting, or any existing floor coverings. Clean the subfloor it's free of dust and debris. Make sure that the flooring is stable and sturdy. Install cement backer board onto the stabilized flooring and the backer board in with 2 inches, at every floor joist screw galvanized screws. The old flooring should be disposed of, and most garbage services don't pick up things that are such.
Work with a chalk line to indicate two lines that intersect in the middle of the region. Make certain that the lines are square to each other (90 degrees). Lay a row of tiles along both lines on the dry floor. Look at the way the tiles are arranged; you want as many entire tiles in the center as possible. Fiddle with all the tile until you're content with the way they may be placed.
Use set to hold your tiles in position. Make use of a notched trowel to spread the thin set. Spread the thin-set simply to as far as you can reach and put a tile. Install your tiles to the inset with a strong downward pressure. Remember to place spacers between the tiles. You're able to tap on the tile on the corners gradually to make sure that it is in place. Begin at the center and work out to the walls. Border tiles and the cut tiles are installed last.