Electric Mops For Tile Floors - Porcelain tile flooring or ceramic is very durable and also an excellent investment in your house. Tiles never wear out, and practically will last forever if they are taken care of. When you are getting ready to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a lot of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You will need to remove all the molding and baseboards. Remove wooden floorings, carpet, or any existing floor coverings. Clean the subfloor it's free of debris and dust. Make sure that the flooring is sturdy and stable. Install cement backer board onto the flooring that was stabilized and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and items that are such are not picked up by most garbage services.
Make use of a chalk line to indicate two lines that intersect at the center of the place. Make sure that the lines are square to every other (90 degrees). Lay a row of tiles along both lines on the floor that was dry. Look at how the tiles are ordered; you want as many entire tiles in the middle as you possibly can. Before you're pleased with the way they may be placed fiddle with all the tile.
Use thin set to hold your tiles in place. Make use of a notched trowel to spread the thin set. Distribute the thin-set just to as far as you are able to comfortably reach and place a tile. Install your tiles to the inset having a firm downward pressure. Don't forget to place spacers between the tiles. You can harness on the tile gently to ensure that it is in place. Border tiles and the cut tiles are installed.