Marley Cushioned Floor Tiles - Ceramic or porcelain tile flooring is very durable and also an excellent investment in your house. Tiles will continue forever when they have been taken good care of, and practically never wear out. When you are preparing to put in the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Eliminate, carpet, or wooden floors. Clean the subfloor making sure it's free of dust and debris. Make sure that the floor is stable and tough. Install cement backer board onto the stabilized floor and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and items that are such are not picked up by most rubbish services.
Use a chalk line to indicate two lines that intersect at the center of the place. Make certain that the lines are square to each other (90 degrees). Look at how the tiles are ordered; you need as many whole tiles in the middle as you can. Fiddle with the tile before you are pleased with the way they may be placed.
Use set to hold your tiles in position. Make use of a notched trowel. Spread the thin-set only to as far as you are able to comfortably reach and place a tile. Install your tiles to the inset with a strong downward pressure. Don't forget to place spacers between the tiles. You can tap on the tile gently to ensure that it's in place. Begin at the center and work out to the walls. Border tiles and the cut tiles are installed.