Insulated Vinyl Floor Tiles - Ceramic or porcelain tile flooring is extremely durable and also a great investment at home. Tiles will last forever if they're cared for, and practically never wear out. If you are getting ready to put in the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You'll need to remove all the molding and baseboards. Eliminate, carpet, or wooden floors. Clean the subfloor making sure it's free of dust and debris. Make sure that the floor is stable and tough. Install cement backer board onto the stabilized floor and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring should be disposed of, and most garbage services don't pick up such things.
Make use of a chalk line to indicate two lines that intersect in the centre of the area. Make sure the lines are square to each other (90 degrees). Set a row of tiles along both lines on the dry floor. Look at just how the tiles are arranged; you want as many whole tiles in the centre as you possibly can. Before you are satisfied with the way they are placed fiddle with all the tile.
Use thin set to hold your tiles in place. Use a notched trowel to spread the thin set. Distribute the thin-set merely to as far as you are able to comfortably reach and place a tile. Install your tiles into the inset using a strong downward pressure. Don't forget to put spacers involving the tiles. You can tap the tile gently to be sure that it is in place. Border tiles and the cut tiles are installed.