Octagon Floor Tile Large - Porcelain tile flooring or ceramic is very durable and also an excellent investment in your house. Tiles will continue forever if they are taken care of, and almost never wear out. When you are getting ready to install the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Eliminate wooden floorings, carpeting, or any existing floor coverings. Clean the subfloor making sure it's free of debris and dust. Make sure that the floor is stable and tough. Install cement backer board onto the floor that was stabilized and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will need to be disposed of, and things that are such are not picked up by most trash services.
Work with a chalk line to indicate two lines that intersect in the centre of the region. Make sure the lines are square to each other (90 degrees). Look at the way the tiles are ordered; you want as many whole tiles in the center as you possibly can. Fiddle with the tile until you are content with the way they are positioned.
Use set to hold your tiles in place. Utilize a notched trowel. Disperse the thin-place simply to as far as it is possible to reach and place a tile. Install your tiles to the inset using a firm downward pressure. Don't forget to put spacers between the tiles. It's possible for you to exploit on the tile gently to be sure that it is in place. Start at the center and work out to the walls. The cut tiles and border tiles are installed.