Vinyl Tiles For Basement Floor - Porcelain tile flooring or ceramic is very durable and also a great investment in your house. Tiles never wear out, and virtually will continue forever if they're taken good care of. If you are preparing to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Remove any existing floor coverings, carpet, or wooden floorings. Clean the subfloor making sure it's free of dust and debris. Make sure the flooring is tough and stable. Install cement backer board onto the flooring that was stabilized and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and most rubbish services do not pick up items that are such.
Utilize a chalk line to mark two lines that intersect in the centre of the region. Make certain the lines are square to each other (90 degrees). Put a row of tiles along both lines on the dry floor. Look at how the tiles are ordered; you want as many whole tiles in the center as possible. Fiddle with all the tile until you are satisfied with the way they may be placed.
Use thin set to hold your tiles in position. Make use of a notched trowel to spread the thin set. Disperse the thin-place only to as far as it is possible to comfortably reach and put a tile. Install your tiles to the inset with a firm downward pressure. Don't forget to put spacers involving the tiles. It's possible for you to tap on the tile on the corners gently to make sure that it is in place. Start at the centre and work out to the walls. Border tiles and the cut tiles are installed last.