Lime Green Quartz Floor Tiles - Porcelain tile flooring or ceramic is extremely durable as well as a great investment in your home. Tiles never wear out, and practically will continue forever when they are looked after. When you are preparing to install the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Remove any existing floor coverings, carpet, or wooden floors. Clean the subfloor making sure it is free of dust and debris. Make sure the flooring is stable and tough. Install cement backer board onto the stabilized flooring and the backer board in with 2 inches, at each floor joist screw galvanized screws. The old flooring should be disposed of, and most rubbish services don't pick up things that are such.
Work with a chalk line to mark two lines that intersect in the centre of the area. Make sure that the lines are square to every other (90 degrees). Lay a row of tiles along both lines on the dry floor. Put spacers between the tiles, leaving enough room for the grout. Look at how the tiles are ordered; you need as many whole tiles in the centre as you possibly can. Before you are content with the way they can be positioned, fiddle with the tile.
Use thin set to hold your tiles set up. Make use of a notched trowel. Spread the thin-place simply to as far as it is possible to reach and put a tile. Install your tiles into the inset using a strong downward pressure. Remember to place spacers between the tiles. It's possible for you to tap on the tile on the corners gradually to make certain that it's in place. The cut tiles and border tiles are installed last.