Floor Tiles Direct From Spain - Porcelain tile flooring or ceramic is very durable as well as a great investment in your house. Tiles will continue forever when they have been cared for, and virtually never wear out. When you are getting ready to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all the molding and baseboards. Eliminate wooden floors, carpeting, or any existing floor coverings. Clean the subfloor it's free of dust and debris. Make sure that the flooring is stable and tough. Install cement backer board onto the flooring that was stabilized and the backer board in with 2 inches, at each floor joist screw galvanized screws. The old flooring will need to be disposed of, and most trash services do not pick up things that are such.
Work with a chalk line to mark two lines that intersect in the middle of the region. Make certain the lines are square to each other (90 degrees). Set a row of tiles along both lines on the dry floor. Look at the way the tiles are ordered; you want as many entire tiles in the middle as you can. Until you're happy with the way they may be placed, fiddle with all the tile.
Use thin set to hold your tiles set up. Make use of a notched trowel. Spread the thin-place only to as far as you can reach and put a tile. Install your tiles into the inset using a strong downward pressure. Don't forget to put spacers between the tiles. It's possible for you to exploit on the tile gently to be certain that it is in place. Begin in the center and work out to the walls. The cut tiles and border tiles are installed.