Bathroom Floor Tile Gray - Porcelain tile flooring or ceramic is very durable and an excellent investment in your house. Tiles will last forever if they're cared for, and almost never wear out. When you're preparing to put in the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You'll need to remove all the molding and baseboards. Eliminate any existing floor coverings, carpet, or wooden floorings. Clean the subfloor making sure it's free of debris and dust. Make sure the floor is secure and sturdy. Install cement backer board onto the floor that was stabilized and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and such things are not picked up by most garbage services.
Make use of a chalk line to indicate two lines that intersect in the centre of the region. Make certain the lines are square to every other (90 degrees). Look at just how the tiles are ordered; you want as many entire tiles in the centre as you can. Until you are satisfied with the way they are placed, fiddle with all the tile.
Use thin set to hold your tiles in position. Make use of a notched trowel to spread the thin set. Spread the thin-set just to as far as you are able to reach and lay a tile. Install your tiles to the inset using a firm downward pressure. Don't forget to put spacers involving the tiles. It's possible for you to tap the tile gradually to make sure that it's in place. Border tiles and the cut tiles are installed last.