Magnetic Leather Floor Tiles - Ceramic or porcelain tile flooring is very durable and also a great investment at home. Tiles never wear out, and almost will continue forever when they have been taken care of. When you're getting ready to set up the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You will need to remove all of the molding and baseboards. Remove any existing floor coverings, carpeting, or wooden floors. Clean the subfloor it's free of debris and dust. Make sure that the flooring is stable and sturdy. Install cement backer board onto the flooring that was stabilized and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will need to be disposed of, and things that are such are not picked up by most rubbish services.
Use a chalk line to mark two lines that intersect in the centre of the area. Make certain the lines are square to each other (90 degrees). Place a row of tiles along both lines on the dry floor. Look at the way the tiles are arranged; you want as many whole tiles in the middle as you can. Fiddle with the tile before you're happy with the way they're positioned.
Use thin set to hold your tiles in place. Use a notched trowel. Spread the thin-place simply to as far as you can reach and lay a tile. Install your tiles into the inset using a strong downward pressure. Don't forget to put spacers between the tiles. You can exploit the tile on the corners gently to make certain that it is in place. The cut tiles and border tiles are installed last.