Porcelain Tile Vs Hardwood Floor - Ceramic or porcelain tile flooring is extremely durable as well as an excellent investment in your home. Tiles never wear out, and virtually will last forever if they are taken care of. When you're preparing to install the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all of the molding and baseboards. Remove any existing floor coverings, carpeting, or wooden floorings. Clean the subfloor making sure it is free of dust and debris. Make sure that the floor is tough and secure. The old flooring will need to be disposed of, and such things are not picked up by most trash services.
Work with a chalk line to indicate two lines that intersect at the center of the place. Be sure that the lines are square to every other (90 degrees). Put a row of tiles along both lines on the dry floor. Look at just how the tiles are arranged; you need as many whole tiles in the centre as possible. Until you are satisfied with the way they may be placed, fiddle with all the tile.
Use thin set to hold your tiles in position. Make use of a notched trowel. Distribute the thin-set only to as far as you can reach and place a tile. Install your tiles to the inset with a firm downward pressure. Don't forget to place spacers between the tiles. You're able to exploit on the tile gradually to ensure that it's in place. Border tiles and the cut tiles are installed.