Ceramic Floor Tiles From Spain - Porcelain tile flooring or ceramic is very durable and also an excellent investment in your house. Tiles never wear out, and almost will last forever when they're looked after. When you are getting ready to put in the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Eliminate any existing floor coverings, carpeting, or wooden floorings. Clean the subfloor making sure it is free of dust and debris. Make sure that the floor is tough and secure. The old flooring will need to be disposed of, and things that are such are not picked up by most rubbish services.
Make use of a chalk line to mark two lines that intersect in the middle of the area. Ensure that the lines are square to each other (90 degrees). Put a row of tiles along both lines on the floor that was dry. Place spacers between the tiles, leaving enough room for the grout. Look at the way the tiles are ordered; you want as many entire tiles in the center as you possibly can. Fiddle with the tile before you're content with the way they're placed.
Use set to hold your tiles in position. Utilize a notched trowel. Spread the thin-set simply to as far as it is possible to reach and put a tile. Install your tiles to the inset with a firm downward pressure. Don't forget to place spacers involving the tiles. You're able to tap the tile on the corners gradually to be certain that it's in place. Start in the center and work out to the walls. Border tiles and the cut tiles are installed last.