Slip Resistant Porcelain Tile Flooring - Ceramic or porcelain tile flooring is extremely durable and an excellent investment in your home. Tiles will continue forever if they have been looked after, and almost never wear out. When you are preparing to install the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You'll need to remove all of the molding and baseboards. Eliminate any existing floor coverings, carpet, or wooden floors. Clean the subfloor it's free of dust and debris. Make sure the floor is sturdy and secure. Install cement backer board onto the floor that was stabilized and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and things that are such are not picked up by most trash services.
Utilize a chalk line to mark two lines that intersect in the middle of the area. Make certain that the lines are square to each other (90 degrees). Place a row of tiles along both lines on the floor that was dry. Look at how the tiles are arranged; you want as many whole tiles in the centre as you possibly can. Fiddle with all the tile before you are happy with the way they've been placed.
Use thin set to hold your tiles in position. Make use of a notched trowel to spread the thin set. Disperse the thin-place only to as far as you are able to reach and lay a tile. Install your tiles to the inset using a firm downward pressure. Remember to put spacers involving the tiles. You're able to tap the tile on the corners gently to make sure that it is in place. Begin in the centre and work out to the walls. The cut tiles and border tiles are installed last.
Related Post "Slip Resistant Porcelain Tile Flooring"