Grey Floor Tiles Homebase

1449 views

Grey Floor Tiles Homebase


Grey Floor Tiles Homebase - Porcelain tile flooring or ceramic is extremely durable and an excellent investment in your house. Tiles will last forever when they are taken good care of, and almost never wear out. When you are preparing to set up the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, pails, hammer, notched trowel, and nails.

You will need to remove all of the molding and baseboards. Remove any existing floor coverings, carpet, or wooden floors. Clean the subfloor making sure it's free of debris and dust. Make sure that the flooring is tough and stable. Install cement backer board onto the stabilized flooring and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will need to be disposed of, and most garbage services do not pick up items that are such.


Use a chalk line to indicate two lines that intersect at the center of the region. Make certain that the lines are square to each other (90 degrees). Lay a row of tiles along both lines on the dry floor. Look at the way the tiles are ordered; you want as many whole tiles in the center as you possibly can. Fiddle with all the tile before you're content with the way they are positioned.

Use thin set to hold your tiles in place. Use a notched trowel to spread the thin set. Spread the thin-set simply to as far as you can reach and put a tile. Install your tiles into the inset with a firm downward pressure. Don't forget to put spacers between the tiles. It's possible for you to exploit the tile gradually to be certain that it is in place. The cut tiles and border tiles are installed last.