Blue Slate Effect Floor Tiles - Porcelain tile flooring or ceramic is extremely durable and an excellent investment in your home. Tiles never wear out, and virtually will continue forever if they are taken good care of. If you are preparing to set up the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a lot of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Eliminate any existing floor coverings, carpet, or wooden floorings. Clean the subfloor making sure it's free of dust and debris. Make sure the flooring is secure and tough. The old flooring will have to be disposed of, and items that are such are not picked up by most garbage services.
Utilize a chalk line to indicate two lines that intersect at the center of the place. Be sure the lines are square to every other (90 degrees). Put a row of tiles along both lines on the dry floor. Place spacers between the tiles, leaving enough room. Look at the way the tiles are ordered; you need as many entire tiles in the center as you possibly can. Until you are content with the way they're positioned fiddle with all the tile.
Use thin set to hold your tiles in position. Utilize a notched trowel to spread the thin set. Disperse the thin-place merely to as far as it is possible to comfortably reach and put a tile. Install your tiles into the inset using a firm downward pressure. Don't forget to put spacers involving the tiles. It's possible for you to tap on the tile on the corners gradually to make certain that it's in place. Begin in the center and work out to the walls. Border tiles and the cut tiles are installed last.
Related Post "Blue Slate Effect Floor Tiles"