Best Floor Mop For Tile Floors - Ceramic or porcelain tile flooring is extremely durable and an excellent investment in your home. Tiles will last forever if they have been looked after, and almost never wear out. When you're preparing to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Eliminate wooden floorings, carpeting, or any existing floor coverings. Clean the subfloor making sure it's free of dust and debris. Make sure that the flooring is tough and stable. Install cement backer board onto the stabilized flooring and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and such things are not picked up by most garbage services.
Work with a chalk line to mark two lines that intersect in the middle of the region. Be sure that the lines are square to each other (90 degrees). Place a row of tiles along both lines on the dry floor. Look at how the tiles are arranged; you need as many whole tiles in the center as you possibly can. Until you're happy with the way they are placed, fiddle with the tile.
Use thin set to hold your tiles in place. Make use of a notched trowel. Distribute the thin-place simply to as far as it is possible to reach and put a tile. Install your tiles to the inset using a firm downward pressure. Don't forget to put spacers between the tiles. It's possible for you to tap the tile on the corners gradually to make sure that it's in place. Border tiles and the cut tiles are installed last.