Baseboard Over Tile Floor - Ceramic or porcelain tile flooring is very durable as well as an excellent investment at home. Tiles will continue forever if they're taken care of, and virtually never wear out. When you're preparing to set up the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a lot of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all of the molding and baseboards. Eliminate, carpet, or wooden floors. Clean the subfloor making sure it is free of dust and debris. Make sure the floor is sturdy and secure. The old flooring will have to be disposed of, and most trash services don't pick up items that are such.
Work with a chalk line to indicate two lines that intersect at the center of the area. Be sure that the lines are square to each other (90 degrees). Place spacers between the tiles, leaving enough room for the grout. Look at just how the tiles are arranged; you want as many whole tiles in the centre as possible. Fiddle with all the tile before you are pleased with the way they are positioned.
Use set to hold your tiles in place. Use a notched trowel to spread the thin set. Spread the thin-set merely to as far as you can reach and put a tile. Install your tiles into the inset having a strong downward pressure. Remember to place spacers between the tiles. You can exploit on the tile on the corners gently to ensure that it's in place. Begin at the centre and work out to the walls. The cut tiles and border tiles are installed.