Interlocking Floor Tiles For Basement


Interlocking Floor Tiles For Basement

Interlocking Floor Tiles For Basement - Ceramic or porcelain tile flooring is extremely durable and also a great investment in your home. Tiles will last forever when they are taken good care of, and virtually never wear out. When you are getting ready to put in the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.

Eliminate wooden floorings, carpet, or any existing floor coverings. Clean the subfloor making sure it's free of debris and dust. Make sure the floor is sturdy and secure. Install cement backer board onto the stabilized floor and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring should be disposed of, and such items are not picked up by most garbage services.

Make use of a chalk line to mark two lines that intersect in the centre of the place. Ensure that the lines are square to every other (90 degrees). Set a row of tiles along both lines on the floor that was dry. Place spacers between the tiles, leaving enough room. Look at how the tiles are arranged; you want as many whole tiles in the middle as you possibly can. Fiddle with the tile before you're satisfied with the way they may be placed.

Use thin set to hold your tiles in place. Use a notched trowel to spread the thin set. Distribute the thin-set just to as far as you are able to reach and put a tile. Install your tiles to the inset having a strong downward pressure. Remember to put spacers between the tiles. You can harness the tile on the corners gradually to make certain that it's in place. Begin in the center and work out to the walls. The cut tiles and border tiles are installed last.