Travertine Floor Tile Pattern Ideas - Porcelain tile flooring or ceramic is very durable and also an excellent investment in your home. Tiles will continue forever if they can be looked after, and almost never wear out. When you are getting ready to install the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, a great deal of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You'll need to remove all of the molding and baseboards. Remove wooden floors, carpet, or any existing floor coverings. Clean the subfloor it's free of debris and dust. Make sure that the floor is stable and sturdy. Install cement backer board onto the floor that was stabilized and the backer board in with 2 inches, at every floor joist screw galvanized screws. The old flooring will have to be disposed of, and most garbage services do not pick up things that are such.
Make use of a chalk line to mark two lines that intersect at the center of the place. Be sure that the lines are square to every other (90 degrees). Set spacers between the tiles, leaving enough room for the grout. Look at just how the tiles are arranged; you want as many entire tiles in the centre as you possibly can. Until you are pleased with the way they can be positioned fiddle with all the tile.
Use thin set to hold your tiles in place. Use a notched trowel. Distribute the thin-set just to as far as you are able to reach and put a tile. Install your tiles to the inset having a strong downward pressure. Don't forget to put spacers between the tiles. You're able to tap on the tile gradually to ensure that it is in place. Begin in the center and work out to the walls. The cut tiles and border tiles are installed last.