Best Floor Scrubber For Tile And Grout - Porcelain tile flooring or ceramic is very durable and an excellent investment in your home. Tiles never wear out, and almost will last forever if they are taken good care of. When you are preparing to put in the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Eliminate any existing floor coverings, carpeting, or wooden floorings. Clean the subfloor it's free of dust and debris. Make sure that the floor is sturdy and secure. Install cement backer board onto the stabilized floor and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring should be disposed of, and items that are such are not picked up by most garbage services.
Work with a chalk line to indicate two lines that intersect at the center of the area. Make certain the lines are square to each other (90 degrees). Set a row of tiles along both lines on the floor that was dry. Look at how the tiles are arranged; you need as many entire tiles in the center as you can. Until you're content with the way they've been positioned, fiddle with all the tile.
Use thin set to hold your tiles in position. Use a notched trowel to spread the thin set. Distribute the thin-set merely to as far as it is possible to comfortably reach and put a tile. Install your tiles to the inset with a strong downward pressure. Don't forget to put spacers between the tiles. You're able to tap the tile gradually to ensure that it is in place. Start at the center and work out to the walls. The cut tiles and border tiles are installed last.
Related Post "Best Floor Scrubber For Tile And Grout"