Craftsman Floor Tile Patterns

617 views

Craftsman Floor Tile Patterns


Craftsman Floor Tile Patterns - Porcelain tile flooring or ceramic is extremely durable and also an excellent investment in your home. Tiles never wear out, and virtually will last forever if they are cared for. When you're preparing to install the tile flooring that you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, pails, hammer, notched trowel, and nails.

Remove any existing floor coverings, carpet, or wooden floorings. Clean the subfloor making sure it's free of debris and dust. Make sure that the floor is tough and stable. Install cement backer board onto the stabilized floor and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and most garbage services don't pick up such items.


Work with a chalk line to indicate two lines that intersect in the middle of the area. Be sure that the lines are square to each other (90 degrees). Lay a row of tiles along both lines on the dry floor. Look at how the tiles are ordered; you need as many entire tiles in the center as you can. Until you're pleased with the way they're positioned fiddle with the tile.

Use set to hold your tiles in position. Utilize a notched trowel. Distribute the thin-set simply to as far as it is possible to comfortably reach and put a tile. Install your tiles into the inset with a strong downward pressure. Remember to place spacers between the tiles. You can exploit on the tile gradually to make sure that it's in place. Border tiles and the cut tiles are installed last.