Black Star Galaxy Floor Tiles - Porcelain tile flooring or ceramic is very durable as well as an excellent investment at home. Tiles will continue forever if they are taken care of, and virtually never wear out. If you are getting ready to install the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
Remove any existing floor coverings, carpet, or wooden floors. Clean the subfloor it's free of debris and dust. Make sure that the floor is tough and stable. The old flooring will need to be disposed of, and such things are not picked up by most rubbish services.
Use a chalk line to indicate two lines that intersect at the center of the area. Be sure the lines are square to each other (90 degrees). Lay a row of tiles along both lines on the dry floor. Put spacers between the tiles, leaving enough room for the grout. Look at the way the tiles are ordered; you want as many whole tiles in the middle as you possibly can. Until you're pleased with the way they can be positioned, fiddle with all the tile.
Use thin set to hold your tiles in place. Make use of a notched trowel. Spread the thin-set merely to as far as it is possible to comfortably reach and put a tile. Install your tiles to the inset with a strong downward pressure. Don't forget to put spacers between the tiles. You can exploit on the tile gently to ensure that it is in place. Border tiles and the cut tiles are installed last.