Tile For Shower Floor And Walls - Ceramic or porcelain tile flooring is extremely durable and also an excellent investment at home. Tiles never wear out, and virtually will last forever if they are taken good care of.
You'll need to remove all of the molding and baseboards. Eliminate any existing floor coverings, carpet, or wooden floors. Clean the subfloor making sure it is free of dust and debris. Make sure that the floor is sturdy and stable. Install cement backer board onto the stabilized floor and the backer board in with 2 inches, at each floor joist screw galvanized screws. The old flooring will need to be disposed of, and most rubbish services don't pick up things that are such.
Make use of a chalk line to indicate two lines that intersect at the center of the area. Make certain the lines are square to every other (90 degrees). Put a row of tiles along both lines on the dry floor. Place spacers between the tiles, leaving enough room. Look at the way the tiles are arranged; you need as many entire tiles in the centre as possible. Until you are content with the way they may be placed fiddle with all the tile.
Use set to hold your tiles in position. Use a notched trowel to spread the thin set. Distribute the thin-place simply to as far as it is possible to reach and lay a tile. Install your tiles into the inset having a strong downward pressure. Remember to place spacers between the tiles. It's possible for you to harness on the tile on the corners gently to be certain that it is in place. Start at the centre and work out to the walls. Border tiles and the cut tiles are installed last.