Tiles For Bathroom Floors And Walls - Ceramic or porcelain tile flooring is extremely durable and an excellent investment at home. Tiles never wear out, and practically will last forever if they are cared for. If you are preparing to set up the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all the molding and baseboards. Eliminate, carpeting, or wooden floorings. Clean the subfloor it is free of debris and dust. Make sure that the floor is stable and sturdy. Install cement backer board onto the stabilized floor and at each floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and most garbage services don't pick up such items.
Use a chalk line to indicate two lines that intersect in the middle of the area. Make certain that the lines are square to each other (90 degrees). Place spacers between the tiles, leaving enough room. Look at just how the tiles are ordered; you need as many entire tiles in the middle as you can. Until you're satisfied with the way they've been placed, fiddle with the tile.
Use thin set to hold your tiles in place. Use a notched trowel to spread the thin set. Spread the thin-place just to as far as you can reach and place a tile. Install your tiles to the inset using a strong downward pressure. Remember to put spacers involving the tiles. You're able to tap on the tile on the corners gently to be sure that it is in place. Start at the centre and work out to the walls. Border tiles and the cut tiles are installed.