Home Tile Floor Scrubbing Machines - Ceramic or porcelain tile flooring is very durable as well as an excellent investment at home. Tiles never wear out, and almost will last forever when they can be cared for. When you are preparing to put in the tile flooring you'll need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, pails, hammer, notched trowel, and nails.
You will need to remove all of the molding and baseboards. Eliminate wooden floorings, carpeting, or any existing floor coverings. Clean the subfloor making sure it's free of dust and debris. Make sure the flooring is stable and sturdy. Install cement backer board onto the flooring that was stabilized and at every floor joist screw, the backer board in with 2 inches galvanized screws. The old flooring will have to be disposed of, and most rubbish services don't pick up things that are such.
Utilize a chalk line to mark two lines that intersect in the middle of the region. Make sure that the lines are square to each other (90 degrees). Put a row of tiles along both lines on the floor that was dry. Place spacers between the tiles, leaving enough room for the grout. Look at how the tiles are ordered; you need as many entire tiles in the center as you possibly can. Until you are content with the way they may be placed fiddle with the tile.
Use thin set to hold your tiles in position. Use a notched trowel to spread the thin set. Disperse the thin-set only to as far as it is possible to reach and lay a tile. Install your tiles to the inset with a strong downward pressure. Don't forget to place spacers between the tiles. You're able to exploit on the tile gradually to be sure that it's in place. Begin at the center and work out to the walls. Border tiles and the cut tiles are installed.