Red Textured Quarry Porcelain Floor Tile 150x150mm - Porcelain tile flooring or ceramic is very durable and also a great investment at home. Tiles will continue forever if they are taken care of, and practically never wear out. When you are getting ready to set up the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, plenty of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
Remove wooden floors, carpet, or any existing floor coverings. Clean the subfloor making sure it's free of dust and debris. Make sure that the floor is tough and stable. The old flooring should be disposed of, and such things are not picked up by most garbage services.
Use a chalk line to indicate two lines that intersect in the middle of the area. Be sure that the lines are square to each other (90 degrees). Put a row of tiles along both lines on the dry floor. Look at how the tiles are ordered; you need as many whole tiles in the center as you possibly can. Before you are content with the way they're positioned fiddle with the tile.
Use set to hold your tiles set up. Utilize a notched trowel. Distribute the thin-place only to as far as you are able to reach and place a tile. Install your tiles into the inset with a strong downward pressure. Remember to put spacers between the tiles. You can harness the tile gradually to be certain that it is in place. Start in the center and work out to the walls. Border tiles and the cut tiles are installed.